FAQs

A G-Drive engine is a generator specification engine with a similar assembly to an IPU engine. The G-Drive products include everything that the OEM Base engines include, plus a fan, radiator cooling pack, air induction system and associated mounts and brackets.

A JCB base engine will compromise of an engine with basic ancillaries such as alternator and belt drive, as well as engine aftertreatment (where applicable).

Autostop helps reduce fuel consumption by automatically shutting down the machine when not in use as well as preventing excessive idle times, which reduce machine clock hours. It is operator configurable using the easy to use intuitive interface, allowing working patterns to be taken into consideration.

The duration of JCB's Factory Tour is approximately 2 hours 30 minutes and covers nearly 3 miles therefore individuals with walking difficulties may find the tour unsuitable.

Driving a JCB Fastrac on the motorway depends on the local legislation in your area, and the specification of your particular machine. For specific guidance on your model, contact your local JCB dealer - you can find them by using our Dealer Locator.

In order to participate in the Factory Tour, it is essential all visitors wear closed toe shoes (i.e. no sandals or flip flops). Failure to do so will result in the individual being unable to participate in the factory tour. JCB will provide all other PPE on site (Hi Viz, glasses & ear protection).

JCB is a wheelchair friendly site, however your Tour Guide is responsible for the welfare of the entire group and as such, we ask anybody in a wheelchair to organise their own assistance within the group, if they are unable to manoeuvre themselves.

Public Tours are booked via our eventbite page here and have a maximum capacity of 50.

All visitors must be 15 years old or over.

A short part of the tour requires guests to walk outside therefore appropriate clothing for the weather conditions should be worn.