HM018T

The HM018T has been designed specifically for use on mini excavators and 1CX Backhoe Loaders.  It is available with three hanger options - Top mount, Fixed side mount hanger and a universal option (without hanger bracket and hoses) for use on non JCB machines.  JCB Breakers also come with a gas tool kit for ease of maintenance.

Features

  • Manual greasing system
  • Comes with a moil and chisel as standard - full range of working tools also available
  • Fully approved and CE marked as appropriate
  • 3 years warranty as standard *12 months on all moving parts

Specifications

COMPATIBLE ON MACHINES WEIGHING
1.5 - 4.0T
IMPACT ENERGY
560J
OPERATING WEIGHT
187kg

Technical Specifications

Breaker model

 

HM018T

Carrier weight*

T

1.5 - 4.0

Operating weight**

kg

187

Blow rate - long stroke

bpm

600 - 1500

Blow rate - short stroke

bpm

N/A

Tool diameter

mm

57

Oil flow

l/min

23 - 70

Pressure

bar

90 - 120

Impact energy***

j

560

Auto grease

x

x

Blank fire

x

x

Noise level (boxed)

dBA

110

Noise level (side plate)

dBA

125


*Universal models can be fitted on machines within the listed carrier weight range'. ** Operating weights are based on boxed version models except HM012T and HM049T which is based on side plate only. ***The Impact energy figures are based on a calculation and may not be an accurate indication.

PEACE OF MIND

For total peace of mind each Contractor Breaker comes with a 3 year warranty.

*12 months on wear parts.

PREMIUM PRODUCTIVITY

Stroke adjusters fitted on HM049T breaker and above allows the operator to adjust tool speed and stroke lengthAuto stop feature protects from blank firing which could cause unecessary wear and damage to the breaker.

Internal control valves deliver higher efficiency and is less vulnerable to damage.

Refillable auto greasing system is available on HM080T and above for reduced maintenance.

READY TO GO

JCB Contractor Breakers are supplied ready to work hard. The HM054T and below comes with two tools and HM080T and above comes with one as standard.

Side mounted hanger options available on HM012T- HM049T enables the breakers to tuck in close to the machine.

A top mounted hanger option is available on all models in addition to a universal option without hanger bracket enabling it to be used on other brands of machinery.

TRIED, TESTED AND TOUGH

All breakers are fully approved and tested as part of every machine development programme. This in turn means each unit is CE marked as appropriate.