LIMESTONE BUCKET - BHL
Features- The block size of the Bucket mesh is 83 X 136 mm
- Design for safe and accurate placement of in-fill materials.
- Designed to operate from the Excavator end service.
- Toe plate with welded Adaptor & replaceable Teeth option
- Limestone & dust are removed before loading into the trucks.
Technical Specifications
- Front Cutting Edge
- 965 mm
- Weight
- 260 kg
- Material Density
- 1400-1700 kg/m3
- Capacity
- 0.3 cu. m
- Payload
- 510 kg
VIBRATORY ROLLER - BHL
Features- Simple plug and play operation.
- Effective compaction of slopes and tricky terrain with high productivity.
- Useful for compaction areas accessible to conventional compaction methods.
- Can work in wet and slippery areas where conventional compactors are not suitable.
- Self-cleaning drum.
- Maintenance free design and easy access to replace vibration damping pads.
Technical Specifications
- Drum Weight
- 417 kg
- Drum Width
- 800 mm
- Drum Diameter
- 580 mm
- Centrifugal force
- 19.1 KN
- Max Pressure
- 175 bar
CONCRETE MIXING BUCKET - BHL
Features- Concrete mixing bucket with HARDOX blades and STRENX bottom.
- Interchangeable and bolded blades.
- It loads up the loose material like a normal bucket.
- After mixing it downloads the concrete through the central outlet or by tilting the bucket.
- Optimal mixing of material.
- The hinged front safety grid can be opened to clean up interior.
- Safety hydraulic valve which blocks the mixing hydraulically if the grid is open (optional).
- Interchangeable and bolded linkage plate.
Technical Specifications
- Oil Flow
- 80-120 lpm
- Oil Pressure
- 200-280 bar
- Bucket Capacity
- 650-800 L
- Weight
- 710 kg
- Concrete Weight
- 1920 kg
QUICK HITCH - EXCAVATOR
Features- Provides greater safety and less effort for the operator to quicker changeover of buckets and attachments.
- Durable design, with harden steel jaws that minimises wear.
- Mechanically operated with spring loaded lock, released by use of a tommy bar.
- The safety lock pin prevents accidental loss of bucket or attachment.
- Easier to change from one attachment to another in less than one minute.
- Provides extended life to pivot pins since no hammering action required during change of attachments.
Technical Specifications
- Weight
- 340 kg
- LxWxH
- 1050x570x470
- Pin Diameter
- 80 mm
- Jaw Width
- 300 mm
CRUSHER BUCKET - Excavator
Features- 0.60 cum capacity with weight of 2465 kgs Crusher bucket is cost effective solution for turning demolition rubble and site waste into useable material, eliminating hauling and disposal costs.
- Powered by the 20/21 tonne excavator and travelling with the excavator, the crusher bucket eliminates the need to transport, hire or purchase and maintain separate mobile crushing equipment.
- Adjustable jaw gap of 20-120 mm , crushes a wide range of sizes and types of material, including brick,concrete and rock. Even material with reinforcing bar can be crushed, so the steel can be recovered for scrap. This feature not available with other mobile crushers.
- Capability to handle soft rock of 315 mm and 225 mm of hard rock. Heavy duty fly wheel storage energy makes optimum use of machine’s hydraulic power and generates a sustained crushing action for highest productivity.
Technical Specifications
- Weight
- 2465 kg
- Capacity
- 0.6 cu. m
- Adjustable jaw gap
- 20-120 mm
CONCRETE SKIP BUCKET - Telehandler
Features- Can be fitted on both 530-110(11mBoom) and 531-70 (7m Boom)
- Hydraulically operated discharge gate allows controlled release of concrete mix using auxiliary hydraulics.
- Fork pockets allow side or rear pick up.
- 10 In. centre discharge pipe for better outflow.
- Concrete skip is designed to enable concrete to be poured into narrow shuttering or columns.
- The skip has a bottom opening and fitted with a chute for sideways discharge.
Technical Specifications
- Hooper Diameter
- Inner – 1150 Outer – 1240 mm
- LxWxH
- 1050*1005*1806
- Weight
- 400 kg
- Capacity
- 500 L
HM140 – Mini Excavator
Features- The HM140 features outstanding impact energy for compact construction activities.
- Sealed for life accumulator means the accumulator only needs recharging upon a full rebuild service.
- Stainless steel piston
- Class-leading power-to-weight performance.
- The stainless-steel build eliminates corrosion and offers greater protection to the seals.
- Reduced maintenance costs
Technical Specifications
- Operating Weight
- 127 kg
- Impact Energy
- 240 J
- Blow Rate
- 960-1320 bpm
- Oil Flow Range
- 15-40 lpm
- Tool Diameter
- 45 mm
DOZER BLADE – Wheeled Loader
Features- Easy design for conversion of wheeled loader to wheeled dozer.
- Bi-directional operation helps grading action both in forward and reverse for optimum grading.
- Dozer blade moves and pushes large amount of material quickly and easily, accomplishing jobs that would otherwise require dedicated equipment.
- Semi U-shape design blade for providing strength and to achieve optimum output.
- Usage of dozer blade in Road Construction, mining, construction sites and quarries helps to increase life of tyres and reduce parts consumptions of allied equipment's working at site.
- Reduction in 4-6 Passes of Grader in Road sector helps reduces Operation and maintenance cost.
Technical Specifications
- Widtht
- 2507 mm
- Height
- 1052 mm
- Weight
- 667 kg
SWEEPER COLLECTOR – SSL
Features- JCB sweeper collector makes the work of site clean-up easy by sweeping, collecting and dumping dirt and debris.
- Capable for full width sweeping of 60” /1525 mm.
- Hydraulically controlled collection hopper is operated from the cab.
- Combination steel and polypropylene brush for superior sweeping finish.
- Gutter brush for curb cleaning and water sprinkler for dust suppression as standard.
- Quick hitch mount with quick release coupling for rapid change over time, increases production time.
Technical Specifications
- Overall Width
- 1890 mm
- Working Width
- 1524 mm
- Capacity
- 0.46 cu. m
- Weight
- 381 kg