Technical Specifications

527-58 AGRI Plus

Specifications

STATIC DIMENSIONS

STATIC DIMENSIONS

Machine model

526-56

527-58

Low cab 20" tyres

Standard cab 24" tyres

A

Overall height*

m

2.40

2.00

2.15

B

Overall width (over tyres)*

m

2.29

2.04

2.10

C

Inside width of cab

m

0.88

0.88

0.88

D

Front track

m

1.81

1.60

1.70

E

Wheelbase

m

2.66

2.61

2.61

F

Overall length to front tyres

m

4.07

3.73

3.83

G

Overall length to front carriage

m

4.66

4.42

4.42

H

Ground clearance

m

0.44

0.3

0.36

J

Front wheel centre to carriage

m

1.20

1.20

1.20

K

Rear wheel centre to rear face

m

0.78

0.61

0.61

Carriage roll back angle

degrees

38.5

40

40

Carriage dump angle

degrees

33

40

40

Outside turn radius (over tyres) 4WS

m

3.58

3.15

3.46

Weight

kg

6270

5900

5900

Tyres

460/70 R24

380/75 R20

450/70 R24

*Dependant upon tyre specified.

ENGINE

Engine

Latest technology and advanced design provides low fuel consumption, reduced noise, high torque and power output,
total reliability and minimal maintenance.

Machine model

526-56 / 527-58

Model

Agri Plus

Manufacturer

JCB

Displacement

ltr

4.4

No. of cylinders

4

Bore size

mm

103

Stroke

mm

132

Aspiration

Turbocharged cooled

Power rating

Power @ 2200rpm

kW (hp)

81 (109)

Torque rating

Torque @ 1300rpm

Nm

440

LIFT PERFORMANCE

lift performance

Machine model

526-56

527-58

Low cab 20" tyres

Standard cab 24" tyres

Maximum lift capacity

kg

2600

2700

2700

Lift capacity to full height

kg

2600

2000

2000

Lift capacity at full reach

kg

1250

1250

1250

Lift height

m

5.60

5.80

5.80

Reach at maximum lift height

m

0.53

0.33

0.29

Maximum forward reach

m

2.95

3.00

2.90

Reach with 1 tonne load

m

2.95

3.00

2.90

Placing height

m

4.87

4.54

4.54

Complies with stability test EN 1459 Annex B.

HYDRAULICS

Hydraulics

Two stage gear pump, fitted with suction strainer and filter. One boom end auxiliary hydraulic service fitted as standard.

Machine model

526-56

527-58

Operating system pressure

bar

260

260

Flow at system pressure @ 2200rpm

ltr/min

80

126

Hydraulic cycle times

Seconds

Seconds

Boom raise

5.2

4.7

Boom lower

3.8

3.4

Extend

4.5

4.9

Retract

2.4

2.8

Bucket dump

2.6

2.2

Bucket crowd

3.1

2.8

BOOM AND CARRIAGE

Boom and Carriage

Boom is manufactured from high tensile steel. Low maintenance, hard wearing pads. JCB tool carrier/Q-Fit parallel lift carriage with mechanical pin locking.

TRANSMISSION

Transmission

527-58: Closed loop variable displacement pump with a continuously variable hydrostatic drive. Comprising of a mechanical gearbox, hydraulic motor and control unit. Permanent 4 wheel drive. Travel speed: 30kph (19mph) and 40kph (25mph).

526-56: JCB Powershift transmission incorporating torque converter, bevel box and a 4 speed powershift gearbox in one

resiliently mounted unit. A combined steering column mounted switch incorporating directional control and 4 forward and 4

reverse powershift gears. Transmission disconnect on loader lever. Travel speed: 40kph (33kph option) Front and rear drive axles: JCB epicyclic hub reduction drive/steer axles with Max-Trac torque proportioning differentials.

2/4 wheel drive disconnect.

ELECTRICS

ELECTRICS

12v negative earth. 95 AH heavy duty battery. 95 amp alternator. Full road lighting. Reversing light. Direction indicators. Hazard warning. Reverse alarm.

STEERING

STEERING

Hydrostatic power steering with power track rods on both axles.

Three steer mode options: Front wheel steer; all wheel steer; crab steer; operated from in the cab by a selection lever.

Option: In cab selector switch with Auto Align.

CAB

CAB

Quiet, safe and comfortable cab conforms to ROPS ISO 3471 and FOPS ISO 3449. Tinted glass all round, with laminated roof screen.

Roof bars, front screen and roof screen wipers and heater/screen demister. Rear opening window with wash/wipe. Audio-visual

warning system for coolant temperature, engine oil pressure, air-cleaner, battery charge, transmission oil temperature and pressure,

water in fuel, hourmeter, road speed indicator, fuel gauge, engine temperature, clock and inclinometer. Adjustable suspension seat, tilt

steer column, park brake, floor mounted throttle and brake pedals.

Hydraulic controls: Single lever servo joystick, incorporating forward/neutral/reverse, with progressive extend/retract and auxiliary incorporating constant flow facility.

Load Moment Indicator: Automatic eye level audio-visual load moment indicator warning system receiving a signal from a load sensor on the rear axle. This system continuously monitors the machine’s forward stability and leaves the operator in control at all times.

OPTIONS AND ACCESSORIES

Options and Accessories

Both machines

Options: Front and rear worklights (with an option of LED), rotating flashing beacon, fire extinguisher, front screen guard, air conditioning, radial tyres, 2 boom end auxiliary services, sunblind, radio kit, carriage hydraulic locking, optional limited slip differential in front axle, air suspension seat, reversing fan, 2-speed and intermittent front wash/wipers, Smoothride, towing facility with trailer lighting facility.

527-58 Poultrymaster options: Blue LED worklights; 100x50x2000mm forks; heated mirrors, cab clean air kit.

Attachments: available with tool carrier or Q-Fit style carriage. Contact your local dealer for details of the comprehensive range.

527-58 only: Low cab, 20" tyres.

*Adaptive Load Control for EU territories conforms to EN15000.