Militaire wiellader

De MILITAIRE JCB WIELLADER is een flexibele gereedschapsdrager en heeft een reeks uitrustingsstukken en configuraties om elke toepassing aan te kunnen.

De veelzijdige HT-laderarm heeft vier breed uit elkaar staande hefcilinders biedt een combinatie van uitstekend zicht met een hoog koppel voor de bak op het hele werkvlak.

De turbodieselmotor levert een hoog koppel, kan op JP8-brandstof draaien en is gekoppeld aan een automatische transmissie tot 40 km/u met tractieregeling. Intelligente hydraulische systemen bieden vermogen, prestaties en efficiëntie. De schommelende achteras en natte schijfremmen houden de machine stabiel en veilig.

  • Laderarm met hoog koppel (HT - High Torque) voor uitstekend zicht en sterke prestaties
  • Tractieregeling
  • Schommelende achteras en natte schijfremmen
  • Topsnelheid is 40 km/u
  • Enorme optielijst om aan te passen aan specifieke toepassingen


It’s easy to get to the engine on a new JCB 427 wheel loader with a large automatic opening single-piece bonnet.

The JCB 427 wheel loader’s articulation joint has a heavy-duty box section, a heavy-duty centre pin and oversized bush, as well as twin taper roller bearings on the bottom box joints. This setup can easily tolerate vertical and horizontal loadings. A solid cast rear counterweight protects the rear of your JCB 427 wheel loader – including the rear lights and cooling pack – from damage.

Hoses are neatly routed and clamped through the  This wheel loader has integral steel fluid tanks for the ultimate in leak protection: a far superior solution to the plastic tanks favoured by some competitors.  JCB Smoothride load suspension limits shock loadings and therefore reduces material spillage and structural stress, as well as increasing operator comfort.

The speed of engagement is adjustable from within the cab using the latest state-of-the-art Command Plus controls.


Built on the same DNA as the rest of our New Generation Wheel Loaders, the 437 shares all the features of the above 427 machine.

The Cummins QSB 6.7-litre engine achieves maximum engine power (136Kw) and peak torque (841Nm) at low revs for excellent response. A variable geometry turbo gives increased performance at low engine speed for improved cycle times and tractive effort.

Engines fitted with a DPF can pose an increased fire risk because extreme heat can be created in regeneration mode. The new 437 doesn’t use DPFs, so this is no cause for concern.


The MTU 6R1000 7.7-litre engine fitted to the new JCB 457 produces 193kW (258hp) of power and 1150Nm of torque (6% more than our outgoing model). What’s more, it produces all of this at low revs for incredibly responsive operation.

Powerful twin variable displacement piston pump hydraulics can circulate a massive 323 l/min for fast cycle times and excellent multifunctioning capability. With maximum breakout forces of 172kN, this wheel loader has the power to carry out extremely arduous loading jobs.

The new 457’s cab is isolator-mounted, compliant with ROPS/FOPS standards, and positively pressurised against dust. You can choose from fresh air, carbon and P3 – HEPA recirculation filters as well.


The ROPS structure on the 437 wheel loader is redesigned; A pillars are the same width as the rear of the cab, providing a larger interior and panoramic front windscreen. Switches and auxiliary controls are now on the right-hand A-pillar.

There are two full colour LCD screens to navigate the operating menus, one of which can double as a monitor for the optional rear-view camera. Using your JCB’s simple, dedicated menu interface is easy with an intuitive optional rotary controller.

As standard, the JCB 437 wheel loader is equipped with heated external mirrors that can be electronically adjusted from inside the cab. Convex mirrors are also available to give the best possible field of vision. An all-new air venting system boasts nine demisting vents and six operator vents to maintain visibility and operator comfort at all times. It also operates at a reduced noise level. All controls are seat-mounted, even moving with the seat suspension.

You can also select the control system that’s best for your operators: choose from single lever joystick or multi-lever configurations, all using electro-hydraulics for the ultimate in precision. After extensive research into operator ergonomics, we’ve devised the Command Driving Position, which boasts the very optimal control layout for a multitude of different driver shapes and sizes.