Technical specification

TM320 Con

Specifications

AXLES

Machine model TM320 / TM320 Wastemaster
Machine model TM320 / TM320 Wastemaster
Type Epicyclic hub reduction
Make JCB
Model Max-Trac
Overall axle ratio/ drop box ratio 13.71
Chassis angle oscillation degrees ±10º

BRAKES

Machine model TM320 / TM320 Wastemaster
Machine model TM320 / TM320 Wastemaster
Service brakes In board oil immersed brakes
Parking brake Cable operated disc brake ontransmissions output shaft

ENGINE

Machine model TM320 / TM320 Wastemaster
Machine model TM320 / TM320 Wastemaster
Manufacturer JCB
Model EcoMAX
Capacity ltr 4.4
Bore mm 103
Stroke mm 132
Aspiration Turbocharged/charge cooled
Numberof cylinders 4
Power rating
Gross power to SAE J1995/ISO 14396 kW (hp) 93 (125) @ 2200 rpm
Net power to J1349/EEC 80/12 kW (hp) 86 (115) @ 2200rpm
Torque rating
Gross torque Nm 550 @ 1500 rpm

HYDRAULICS

Machine model TM320 / TM320 Wastemaster
Machine model TM320 / TM320 Wastemaster
Pump type Variable displacement piston pump
Pump maximumflow l/min 140
Pump maximumpressure bar 230
Hydraulic cycle times
Boomraise seconds 5.5
Boomlower seconds 6
Extend seconds 3.5

ELECTRICAL SYSTEM

Machine model TM320 / TM320 Wastemaster
Machine model TM320 / TM320 Wastemaster
System voltage Volt 12
Alternator output Amp Hour 150
Battery capacity Amp Hour 120

NOISE AND VIBRATION

Uncertainty Measurement conditions.
Uncertainty Measurement conditions.
Noise at the operator station LpA 73 dB +/- 1 dB Determined in accordance with the test method defined in ISO 6396 and the dynamic test condition defined on 2000/14/EC.
Noise emission from the machine LWA 107 dB +/- 1 dB Guaranteed equivalent sound power (external noise) determined in accordance with the dynamic test conditions defined in 2000/14/EC.
Whole body vibration m/s2 0.39 +/- 0.11 dB ISO 2631-1:1997 normalised to an 8h reference period and based
upon a test cycle comprising of loader work (soil).
Hand-arm vibration m/s2 <2.5 N/A ISO 5349-2:2001 dynamic test conditions.

LOADER PERFORMANCE

Machine model TM320 / TM320 Wastemaster
Machine model TM320 / TM320 Wastemaster
Maximumlift capacity to full height with forks kg 3200
Lift capacity at full reach kg 1750
Lift height mm 5200
Maximum forward reach mm 2950
Straighttipping load - forks with 500mm load centre* 5262
Full turn tipping load - forks with 500mm load centre* kg 4052**
Full turn tipping load- forks calculated @ 80% load factor* kg 3242**
Full turn tipping load - forks calculated @ 60% load factor* kg 2431**
Breakout force - tearout kg 6260
** Straight and Full Turn Tipping Load with forks and direct mount to Pin and Cone carriage to EN474 (ISO 14397)

SERVICE FILL CAPACITIES

Machine model TM320 / TM320 Wastemaster
Machine model TM320 / TM320 Wastemaster
Hydraulic tank & transmission litres 97
Fueltank litres 160
Engine oil sump litres 14
Axle oil (front) including hubs litres 20
Axle oil (rear) including hubs litres 20
Drop box litres 1.3
DEF litres 29

STATIC DIMENSIONS

A Overallheight mm 2703
A Overallheight mm 2703
B Overallwidth (over tyres) mm 2350
C Wheelbase mm 2550
D Ground clearance mm 472
E Height to top of boom pivot mm 1835
F Wheel track mm 1870
G Axle to shovel toe plate mm 1627
H Axle to counterweight face mm 2143
I Total length* mm 6322
J Dump reach mm 933
K Dump height mm 4511
L Load over height mm 5182
M Pin height mm 5367
N Maximumdump angle degrees 39
O Roll back at carry degrees 41
Total length to front of hitch mm 5886
Insideradius mm 2001
Outside radius (edge of tyre) mm 4350
Outside radius (over shovel) mm 4633
Articulation angle degrees ±43°
Operating weight kg 8160
Front axle weight kg 2730
Rear axle weight kg 5470
Tyres used for specifications MichelinBIBLOAD460/70R24
Bucket used for specification 1 m³ GP
Hitch used for specification Pin & Cone
*Please note total length: machine fitted with standard bucket – boom fully down, shovel crowded fully back.

STANDARD/OPTIONAL EQUIPMENT

ENGINE ANDCOOLING
   TM320  TM320 Wastemaster
125hp JCBengine
Cyclonic air filter
Air intake scavenge system
Widecore cooling pack
Auto reversing fan + +
TRANSMISSION / AXLES
4speedPowershift transmission X
3-speed powershift X
20kphtravel speed X
33kph travel speed X
Transmissions disconnect on footbrake
Forward / reverse controls on joystick
Column mounted transmission selector
In board oil immersed disc brakes
Limited slip differentials front and rear + +
HYDRAULICS
Servo controls
Flow sharing hydraulics
Proportional boom and auxiliary controls
Adjustable constant flow hydraulics
Variabledisplacementpiston pump
Priority steer valve
Hose burst check valves
JCB Adaptive Load Control
JCB Smoothride system + +
Biodegradable hydraulic oil + +
CAB
ROPS/FOPS safety structure
Laminated screen
Fully adjustable mechanical seat
Air suspension seat + +
Interior light
Tilt andtelescopicsteering column
Adjustable joystick control console and armrest
Front and rear wash/wipe
3 speed heater fan
Air conditioning + +
RH openingwindow withlock back
LH opening door with door lock back
LH Slidingwindow + +
Single lever joystick controls
Loader control isolator
External rear view mirrors
Front and roof screen blinds
Fire extinguisher + +
Additional storage box + +
Tool box + +
Front screen guard +
ELECTRICAL
Road lights front and rear
Reverse lights
Battery isolator
Direction indicators
Rotating beacon + +
Twin beacons + +
Front and rear worklights + +
Boom worklights + +
Twin reverse light kit + +
Reverse foglight kit + +
LiveLink telematics
LED 360 degree worklights + +
12v in-cab power socket
Reverse camera with colour screen + +
CHASSIS AND BODYWORK
Articulated steering
Centre pivot oscillation
Plastic front and rear fenders X
Fixed bottom step
Full width rear counterweight
Recovery hitch
Prop shaft guard
Grease gun and cartridge + +
Deluxe exterior mirrors
Headlight guards +
Front bumper +
Steel front fenders +
LOADER
Centre mounted single stage telescopic boom
Parallel lift
End damping on boom lower, extend and retract
Pin and Cone carriage (CAT III) + +
JCB Q-fit carriage + +
Industrial carriage + +
Electrical in cabquickhitch pinisolation
STANDARD
OPTIONAL +
NOT AVAILABLE X
NB. Regional variations may apply to standard and optional equipment

TRANSMISSION

Machine model TM320 TM320 Wastemaster
Machine model TM320 TM320 Wastemaster
Type Powershift Powershift
Make JCB JCB
Model PS764-4Speed PS764-3Speed
Max travel speed kph 33 20

TYRE OPTIONS

Manufacturer Size Type Application Dimensional changes
Manufacturer Size Type Application Dimensional changes
Overall height(mm) Width over tyres(mm)
Michelin 15.5R25 XHA EM -5 -86
Michelin 15.5R25 XTLA EM -9 -86
Michelin 12.0x24 X-MINED2 WASTE 31 -19
Michelin 12.0x24 XSM D2+ WASTE 26 -19
SG Revolution 13.0x24 SE WASTE 26 -2