Technical Specification

525 60 Hi Viz

Specifications

STATIC DIMENSIONS

STATIC DIMENSIONS

A

Overall height*

m

1.89

B

Overall width (over tyres)*

m

1.84

C

Inside width of cab

m

0.88

D

Front track

m

1.53

E

Wheelbase

m

2.39

F

Overall Length to front tyres

m

3.38

G

Overall length to front carriage

m

4

H

Ground clearance

m

0.23

J

Front wheel centre to carriage

m

1.02

K

Rear wheel centre to rear face

m

0.6

Outside turn radius (over tyres)

m

3.7

Carriage roll back angle

degrees

11

Carriage dump angle

degrees

114

Weight

kg

5230

Tyres

industrial

12x16.5

*Dependant upon tyre specified.

LIFT PERFORMANCE

lift performance

Maximum lift capacity

kg

2500

Lift capacity to full height

kg

2000

Lift capacity at full reach

kg

750

Lift height

m

6

Reach at maximum lift height

m

-0.15

Maximum forward reach (to front of carriage)

m

3.5

Complies with stability test EN1459-1

ENGINE

Engine stage V

Latest Stage V technology and advanced design provides low fuel consumption, reduced noise, high torque and power output,
total reliability and minimal maintenance. Two-stage, dry type air filter with primary and safety elements. Territory dependent.

Manufacturer

JCB DIESEL BY KOHLER

Displacement

ltr

2.5

No. of cylinders

4

Bore size

mm

88

Stroke

mm

102

Aspiration

Turbocharged cooled

Power rating

Power @ 2200rpm

kW (hp)

55 (74)

Torque rating

Torque @ 1500rpm

Nm

310

HYDRAULICS

Hydraulics

Two stage gear pump, fitted with suction strainer and filter. Boom end auxiliary services are optional.

Operating system pressure

bar

235

Flow at system pressure @ 2200rpm

ltr/min

80

Hydraulic cycle times

Seconds

Boom raise

7.6

Boom lower

5.3

Boom extend

7.5

Retract

3.7

Bucket dump

1.9

Bucket crowd

2.9

TRANSMISSION

TRANSMISSION

Closed loop variable displacement pump with a continuously variable hydrostatic drive. Comprising of a hydraulic motor and control unit. Permanent 4 wheel drive. Travel speed: 25kph (15mph), 20kph (12mph) (TUV).

Forward

Reverse

Low range

kph

12

12

High range

kph

25

25

ELECTRICS

ELECTRICS

System voltage

Volt

12

Alternator output

Amp hour

100

Battery capacity

Amp hour

120

Full road lighting. Reversing light. Direction indicators. Hazard warning. Reverse alarm.

NOISE AND VIBRATION

NOISE AND VIBRATION

Uncertainty

Measurement conditions

Noise at the operator station (LpA)

76 dB

+/– 1 dB

Determined in accordance with the test method defined in EN12053.

Noise emission from the machine (LWA)

103 dB

+/– 1 dB

Guaranteed equivalent sound power (external noise) determined in accordance with the dynamic test conditions defined in 2000/14/EC.

Whole body vibration (m/s²)

0.43

0.22

ISO 2631-1:1997 normalised to an 8h reference period and based upon a test cycle defined in SAE J1166.

Hand-arm vibration (m/s²)

<2.5

N/A

ISO 5349-2:2001 dynamic test conditions.

AXLES

AXLES

Front and rear drive JCB axles: epicyclic hub reduction drive/steer axles with torque proportioning differentials.

BRAKES

Brakes

Service brakes: Hydraulically operated self-adjusting, oil-immersed in-board multi-disc type mounted on front axle.

Parking brake: SAHR Handbrake self adjusting, oil immersed in-board multi disc type mounted on front axle operated by in-cab switch.

Service fill capacities

Hydraulic system

litres

65

Fuel tank

litres

75

CAB

CAB

Quiet, safe and comfortable cab conforms to ROPS ISO 3471 and FOPS ISO 3449. Tinted glass all round, with laminated roof screen.

Roof bars, front screen and roof screen wipers and heater/screen demister. Rear opening window with wash/wipe. Audio-visual

warning system for coolant temperature, engine oil pressure, air-cleaner, battery charge, transmission oil temperature and pressure,

water in fuel, hourmeter, road speed indicator, fuel gauge, engine temperature, clock and inclinometer. Adjustable suspension seat, tilt

steer column, park brake, floor mounted throttle and brake pedals.

Hydraulic controls: Single lever servo joystick, incorporating forward/neutral/reverse, with progressive extend/retract and auxiliary

incorporating constant flow facility.

Load Moment Indicator: Automatic eye level audio-visual load moment indicator warning system receiving a signal from a load sensor on the rear axle. This system continuously monitors the machine’s forward stability and leaves the operator in control at all times.